扭剪型電動扳手是否需要校驗

來源：http://www.tj-feiya.com日期：2024-01-10 發布人：創始人

扭剪型電動扳手不需要校驗。

The torsion shear electric wrench does not require calibration.

扭剪型電動扳手不像定扭矩電動扳手，需要校驗扭矩的精度，是否準確，扭剪型電動扳手只是將扭剪型高強螺栓的梅花頭打斷，既是完成了它的工作目的。

Unlike fixed torque electric wrenches, torsion shear electric wrenches require verification of torque accuracy. They only break the plum blossom head of the torsion shear high-strength bolt, completing their work purpose.

因?yàn)榕ぜ粜碗妱?dòng)扳手在使用時，將扭剪型電動扳手頭對準扭剪型高強螺栓頭，扣動開關即可開始工作，幾秒后，螺栓梅花頭將被扭斷，抽出扳手扣動扳機將梅花頭彈出，即結束工作。

Because when using the torsion shear type electric wrench, align the head of the torsion shear type electric wrench with the high-strength bolt head, press the switch to start working. After a few seconds, the bolt plum blossom head will be twisted and broken. Pull out the wrench and pull the trigger to pop out the plum blossom head, which ends the work.

本文由扭剪扳手廠家友情奉獻.更多有關的知識請點擊:http://www.tj-feiya.com我們將用真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from a manufacturer of torsion wrenches. For more information, please click on: http://www.tj-feiya.com We will provide you with comprehensive service with a sincere attitude. We will gradually contribute more relevant knowledge to everyone. Stay tuned

下一篇：電動扭剪扳手日常維護要注意什么？上一篇：扭剪扳手使用的詳細功能特點

扭剪型電動扳手是否需要校驗

“閱讀”

項目

x24j-4扭剪扳手

x24j-3扳手

x24j-3扳手

x30j-3扳手

相關文章